three Brake Choices For Kingpinless Swivel Or Inflexible Casters In Heavy Obligation Industrial Caster Purposes

three Brake Choices For Kingpinless Swivel Or Inflexible Casters In Heavy Obligation Industrial Caster Purposes

Category : Latest Updates

Brakes are a highly regarded possibility for heavy responsibility industrial casters. Brakes permit the person to cease carts in movement and lock them in place, which may serve utility functions or enhance security by lowering the possibility of a runaway cart. There are numerous various kinds of caster brakes obtainable with totally different traits. This text will talk about a number of the extra fashionable brake designs.

1. Polyurethane Cam Brakes

The polyurethane cam brakes make the most of a cam produced from polyurethane. The cam is then used to tighten a plate in opposition to the operating floor of the wheel, locking the wheel in place. The cam will be actuated from a wide range of totally different strategies, from handles to levers molded straight into the cam. The polyurethane cam brake supplies good holding pressure which will be adjusted relying on how far the cam is became the wheel. One other profit to any such brake is the actuation methodology will be executed with toes, so operator pressure from bending over to actuate with a hand will be eradicated. These brakes will be mounted on the main or trailing fringe of a caster.

2. Face Contact Brakes

Face contact brakes use a threaded rod to push a plate into the operating floor of the wheel. The threaded rod has a deal with hooked up to the tip of it and is tightened by hand. These brakes present a big holding pressure and are good in heavy load purposes. These brakes will be mounted on the main or trailing fringe of a caster. The disadvantage to any such brake is the operator must bend over and tighten/loosen the brake by hand, which will increase operator pressure and may take up extra time than a foot actuated brake bulk material handling equipment.

three. Facet Brakes

Facet brakes make the most of a foot pedal on the facet of the caster which, when actuated, presses a washer into the hub of the wheel. These brakes are very simple to lock and unlock and will be executed with the operators foot. In addition they take up little or no room since they’re mounted to the facet of the caster and match throughout the swivel radius of the caster wheel. The disadvantage to those brakes is they don’t present a lot holding pressure and subsequently are suited higher for gentle responsibility purposes.


Leave a Reply